Difference between revisions of "Clock Card"
From MCEWiki
Line 4: | Line 4: | ||
* communicate to the outside world: | * communicate to the outside world: | ||
** a pair of [[Fiber Cable |fibre optical links]] connected to a PC that controls the MCE subrack. ([http://www.cypress.com/?docID=31689 Cypress Hotlink] protocol is used.) | ** a pair of [[Fiber Cable |fibre optical links]] connected to a PC that controls the MCE subrack. ([http://www.cypress.com/?docID=31689 Cypress Hotlink] protocol is used.) | ||
− | ** a [[Fiber Cable |fibre link]] to a Sync Box. | + | ** a manchester-encoded [[Fiber Cable |fibre link]] to a Sync Box. |
+ | ** a non-manchester-encoded [[Fiber Cable |fibre link]] input (only populated prior to RevD) | ||
* packet assembly/disassembly | * packet assembly/disassembly | ||
* dispatch incoming commands to other cards in the MCE rack over the backplane | * dispatch incoming commands to other cards in the MCE rack over the backplane |
Revision as of 10:51, 4 August 2015
Functional Description
Each MCE is equipped with only one Clock Card. There Clock Card is responsible for the following tasks:
- communicate to the outside world:
- a pair of fibre optical links connected to a PC that controls the MCE subrack. (Cypress Hotlink protocol is used.)
- a manchester-encoded fibre link to a Sync Box.
- a non-manchester-encoded fibre link input (only populated prior to RevD)
- packet assembly/disassembly
- dispatch incoming commands to other cards in the MCE rack over the backplane
- Clock generation and distribution
- coordinate operation among MCE cards
- Clock Card firmware
- Clock Card commands
- Block diagram [PDF] (obsolete)
- Clock Card Rev B5 to Rev B6 changes
- Clock Card Rev B to Rev C changes
- Fiber Communicaiton Protocol