Difference between revisions of "MCE firmware"
From MCEWiki
(→MCE Firmware Releases) |
(→MCE Firmware Releases) |
||
Line 10: | Line 10: | ||
= MCE Firmware Releases = | = MCE Firmware Releases = | ||
− | * [http://www.phas.ubc.ca/~mce/mcedocs/firmware/ MCE firmware | + | The latest firmware files: |
+ | * [http://www.phas.ubc.ca/~mce/mcedocs/firmware/ MCE Firmware File Downloads] | ||
+ | |||
+ | Setting the permissions on firmware files uploaded to the folder above: | ||
> ssh phas.ubc.ca | > ssh phas.ubc.ca | ||
> cd ~mce/public_html/mcedocs/firmware | > cd ~mce/public_html/mcedocs/firmware | ||
> chmod o+r rc_*.pof | > chmod o+r rc_*.pof | ||
− | + | Converting between .sof, .pof, .jic, .jam, etc: | |
+ | * [http://e-mode.phas.ubc.ca/intmcewiki/index.php/Programming_EPCS64 MCE Firmware File Conversions] | ||
+ | |||
+ | Recommended versions of firmware, and lists of compatible firmware files across cards: | ||
* [[ Compatible Versions (CC,RC,BC,AC) ]] | * [[ Compatible Versions (CC,RC,BC,AC) ]] | ||
− | + | Revision information on the firmware for each card: | |
* [[ Clock Card (CC) ]] | * [[ Clock Card (CC) ]] | ||
* [[ Readout Card (RC) | Readout Card (RC) Rev. A/B]] | * [[ Readout Card (RC) | Readout Card (RC) Rev. A/B]] |
Revision as of 18:10, 1 February 2010
Contents
Critical Notes
- Always cleanly reset the MCE after a power-up or a reconfiguration! If not, MCE communication with the PC or Sync Box may not work.
> mce_reset_clean
- After an mce_reset, not all of the DAC outputs are set to zero. In addition, values written to RAM-based registers are not reset. A full reconfiguration is required for a proper reset.
> rs psc cycle_pow 1 > mce_reset_clean
MCE Firmware Releases
The latest firmware files:
Setting the permissions on firmware files uploaded to the folder above:
> ssh phas.ubc.ca > cd ~mce/public_html/mcedocs/firmware > chmod o+r rc_*.pof
Converting between .sof, .pof, .jic, .jam, etc:
Recommended versions of firmware, and lists of compatible firmware files across cards:
Revision information on the firmware for each card:
- Clock Card (CC)
- Readout Card (RC) Rev. A/B
- Readout Card (RC) Rev. C/D
- Bias Card (BC)
- Address Card (AC)
- Power-Supply Unit Controller (PSUC) Rev. 1
- Power-Supply Unit Controller (PSUC) Rev. 2
MCE Features and How-To Guides
- Data Acquisition
- Readout Card
- Data Modes
- Filtered Data & the Digital 4-pole Butterworth Low-pass Filter
- Raw 50 MHz Data
- Flux Jumping
- FSFB Clamping Commands (i.e. To Prevent Unlocked Pixels from Ramping)
- Clock Card
- Remote Firmware Update
- Internal Commands
- Arbitrary Waveform Generator (i.e. Maximum Length Sequences for Complex Impedance Measurements)
- Ramp Generator
- Temperature Sensing
MCE Firmware Bugs/ Features Under Development
- This section has been moved to the Internal MCE Wiki.
Hardware Peripherals
Software Tools
All that you need to know about logging into our CVS repository can be found here:
We decided (sadly) NOT to migrate from CVS to SVN, if we ever do here is some information:
- SVN Manual
- Accessing the SVN Repository
- SVN Commit Guidelines
- SVN Basic Operations