Revision as of 15:08, 23 December 2009

Critical Notes

Always cleanly reset the MCE after a power-up or a reconfiguration! If you do not, MCE communication with the PC or Sync Box may not work.

> mce_reset_clean

Note that after a reset, not all of the DAC outputs are reset to zero. In addition, values written to RAM-based registers are not reset. To reset these registers, a full reconfiguration is required.

> rs psc cycle_pow 1
> mce_reset_clean

You can download all the MCE firmware configuration files here. When copying files to this folder, make sure that that they are readable:

> ssh phas.ubc.ca
> cd ~mce/public_html/mcedocs/firmware
> chmod o+r rc_*.pof

Information on recommended versions of firmware, and lists of compatible firmware files across cards are here:

Information on the firmware for each card can be found through the links below:

All that you need to know about logging into our CVS repository can be found here:

We decided (sadly) NOT to migrate from CVS to SVN, if we ever do here is some information:

@@ Line 1: / Line 1: @@
 = Critical Notes =
-* Quartus II 8.0 and 8.0 + sp1 generate .pof files that seem to program the configuration device, but do not work after a power-cycle.  When generating .pof files, do not use these versions of Quartus II.  For more information, refer to the [[Quartus 8.0 .pof Generation Bug]] page.
+* [[Quartus 8.0 .pof Generation Bug]]
 * Always cleanly reset the MCE after a power-up or a reconfiguration!  If you do not, MCE communication with the PC or Sync Box may not work.