Difference between revisions of "MCE firmware"
From MCEWiki
(→MCE Features and How-To Guides) |
(→MCE Firmware Releases) |
||
| Line 15: | Line 15: | ||
> chmod o+r rc_*.pof | > chmod o+r rc_*.pof | ||
| − | Information on recommended versions of firmware, and lists of compatible firmware files across cards are here: [[ Compatible Versions (CC,RC,BC,AC) ]] | + | Information on recommended versions of firmware, and lists of compatible firmware files across cards are here: |
| + | * [[ Compatible Versions (CC,RC,BC,AC) ]] | ||
Information on the firmware for each card can be found through the links below: | Information on the firmware for each card can be found through the links below: | ||
| Line 21: | Line 22: | ||
* [[ Readout Card (RC) | Readout Card (RC) Rev. A/B]] | * [[ Readout Card (RC) | Readout Card (RC) Rev. A/B]] | ||
* [[ Readout Card (RC) Rev. C/D ]] | * [[ Readout Card (RC) Rev. C/D ]] | ||
| + | ** [http://e-mode.phas.ubc.ca/intmcewiki/index.php/Programming_EPCS64 Generating Configuration Files for EPCS64's] | ||
* [[ Bias Card (BC) ]] | * [[ Bias Card (BC) ]] | ||
* [[ Address Card (AC) ]] | * [[ Address Card (AC) ]] | ||
* [[ Power-Supply Unit Controller (PSUC) Rev. 1 ]] | * [[ Power-Supply Unit Controller (PSUC) Rev. 1 ]] | ||
* [[ Power-Supply Unit Controller (PSUC) Rev. 2 ]] | * [[ Power-Supply Unit Controller (PSUC) Rev. 2 ]] | ||
| − | |||
= MCE Features and How-To Guides = | = MCE Features and How-To Guides = | ||
Revision as of 17:01, 27 January 2010
Contents
Critical Notes
- Always cleanly reset the MCE after a power-up or a reconfiguration! If not, MCE communication with the PC or Sync Box may not work.
> mce_reset_clean
- After an mce_reset, not all of the DAC outputs are set to zero. In addition, values written to RAM-based registers are not reset. A full reconfiguration is required for a proper reset.
> rs psc cycle_pow 1 > mce_reset_clean
MCE Firmware Releases
You can download all the MCE firmware configuration files here. To upload a file to this folder, make sure that permissions are set correctly:
> ssh phas.ubc.ca > cd ~mce/public_html/mcedocs/firmware > chmod o+r rc_*.pof
Information on recommended versions of firmware, and lists of compatible firmware files across cards are here:
Information on the firmware for each card can be found through the links below:
- Clock Card (CC)
- Readout Card (RC) Rev. A/B
- Readout Card (RC) Rev. C/D
- Bias Card (BC)
- Address Card (AC)
- Power-Supply Unit Controller (PSUC) Rev. 1
- Power-Supply Unit Controller (PSUC) Rev. 2
MCE Features and How-To Guides
- Data Acquisition
- Readout Card
- Data Modes
- Filtered Data & the Digital 4-pole Butterworth Low-pass Filter
- Raw 50 MHz Data
- Flux Jumping
- FSFB Clamping Commands (i.e. To Prevent Unlocked Pixels from Ramping)
- Clock Card
- Remote Firmware Update
- Internal Commands
- Arbitrary Waveform Generator (i.e. Maximum Length Sequences for Complex Impedance Measurements)
- Ramp Generator
- Temperature Sensing
MCE Firmware Bugs/ Features Under Development
- This section has been moved to the Internal MCE Wiki.
Hardware Peripherals
Software Tools
All that you need to know about logging into our CVS repository can be found here:
We decided (sadly) NOT to migrate from CVS to SVN, if we ever do here is some information:
- SVN Manual
- Accessing the SVN Repository
- SVN Commit Guidelines
- SVN Basic Operations
