MCE Card Specific Power Requirements

For general MCE power requirements, see MCE Power Requirements.

The power consumption during normal operation is listed here. The actual cosumption may vary depending on MCE firmware parameter settings, etc. The numbers below are calculated based on V_core = 3V, V_lvd=4.5V, V_a+=6.2V, V_a− = −6.2V, V_ah=10V.

Card	Revision	Power (W)
Clock Card	B	8.73
Readout Card	E	13.4
Readout Card	B	25.5
Bias Card	F1	2.1
Bias Card	F0	4.8
Bias Card	D	2.1
Address Card	D	8.4

A simple form, based on the tables given below, to compute the power requirements of a subrack populated with user-selectable cards is available: http://e-mode.phas.ubc.ca/mce/cgi-bin/power.cgi

Clock Card

Supply	Rev. B
Vcore	0.3 A
Vlvd	0.5 A
Va+	0.9 A
Va−	unused
Vah	unused

Readout Card

Supply	Rev. E	Rev. B
Vcore	1.11 A	0.85 A
Vlvd	0.20 A	0.20 A
Va+	1.11 A	3.0–3.3 A
Va−	0.37 A	0.25 A
Vah	unused	0.005 A

Bias Card

Supply	Rev. F11	Rev. F00	Rev. D
Vcore	0.09 A	0.09 A	0.05 A
Vlvd	0.12 A	0.12 A	0.07 A
Va+	0.12 A	0.36 A	0.12 A
Va−	0.08 A	0.28 A	0.12 A
Vah	unused	unused	0.02 A

¹ In Rev. F1, in order to save power, L12 and L13 (ECO-055) are removed to disable regulators U34 and U35 supplying +/-5V to the low noise bias channels. This results in total of ~2.7W power saving.

Address Card

Supply	Rev. D
Vcore	0.40 A
Vlvd	1.60 A
Va+	unused
Va−	unused
Vah	unused