Difference between revisions of "MCE Card Specific Power Requirements"
From MCEWiki
Line 1: | Line 1: | ||
The power consumption during normal operation is listed here. The actual cosumption may vary depending on MCE firmware parameter settings, etc. | The power consumption during normal operation is listed here. The actual cosumption may vary depending on MCE firmware parameter settings, etc. | ||
− | This is calculated based on V<sub>core</sub> = 3V, V<sub>lvd</sub>=4.5V, | + | This is calculated based on V<sub>core</sub> = 3V, V<sub>lvd</sub>=4.5V, V<sub>a+</sub>=6.2V, V<sub>a−</sub> = −6.2V, V<sub>ah</sub>=10V. |
− | {| class="wikitable" style="text-align:center | + | {| class="wikitable" style="text-align:center" |
|- | |- | ||
− | ! | + | ! Card |
− | ! | + | ! Revision |
− | ! | + | ! Power (W) |
|- | |- | ||
| Clock Card | | Clock Card | ||
− | + | | B | |
− | + | | 8.73 | |
|- | |- | ||
| Readout Card | | Readout Card | ||
− | + | | E | |
− | + | | 13.4 | |
|- | |- | ||
| Readout Card | | Readout Card | ||
− | + | | B | |
− | + | | 25.5 | |
|- | |- | ||
| Bias Card | | Bias Card | ||
− | | | + | | F<sub>1</sub> |
− | + | | 2.1 | |
|- | |- | ||
| Bias Card | | Bias Card | ||
− | | | + | | F<sub>0</sub> |
− | + | | 4.8 | |
|- | |- | ||
| Bias Card | | Bias Card | ||
− | + | | D | |
− | + | | 2.1 | |
|- | |- | ||
| Address Card | | Address Card | ||
− | + | | D | |
− | + | | 8.4 | |
− | |||
|} | |} | ||
A simple form, based on the tables given below, to compute the power requirements of a subrack populated with user-selectable cards is available: http://e-mode.phas.ubc.ca/mce/cgi-bin/power.cgi | A simple form, based on the tables given below, to compute the power requirements of a subrack populated with user-selectable cards is available: http://e-mode.phas.ubc.ca/mce/cgi-bin/power.cgi | ||
==Clock Card== | ==Clock Card== | ||
− | + | {| class="wikitable" style="text-align:center" | |
− | {| | ||
− | |||
|- | |- | ||
− | + | ! Supply | |
− | + | ! Rev. B | |
|- | |- | ||
− | | | + | | V<sub>core</sub> |
− | + | | 0.3 A | |
|- | |- | ||
− | | | + | | V<sub>lvd</sub> |
− | + | | 0.5 A | |
|- | |- | ||
− | | | + | | V<sub>a+</sub> |
− | | | + | | 0.9 A |
|- | |- | ||
− | | | + | | V<sub>a−</sub> |
− | + | | unused | |
|- | |- | ||
+ | | V<sub>ah</sub> | ||
+ | | unused | ||
|} | |} | ||
==Readout Card== | ==Readout Card== | ||
− | {| | + | {| class="wikitable" style="text-align:center" |
|- | |- | ||
− | + | ! Supply | |
− | + | ! Rev. E | |
− | + | ! Rev. B | |
|- | |- | ||
− | | | + | | V<sub>core</sub> |
− | + | | 1.11 A | |
− | + | | 0.85 A | |
|- | |- | ||
− | | | + | | V<sub>lvd</sub> |
− | + | | 0.20 A | |
− | + | | 0.20 A | |
|- | |- | ||
− | | | + | | V<sub>a+</sub> |
− | + | | 1.11 A | |
− | + | | 3.0–3.3 A | |
|- | |- | ||
− | | | + | | V<sub>a−</sub> |
− | + | | 0.37 A | |
− | + | | 0.25 A | |
|- | |- | ||
− | | | + | | V<sub>ah</sub> |
− | + | | unused | |
− | + | | 0.005 A | |
|- | |- | ||
|} | |} | ||
==Bias Card== | ==Bias Card== | ||
− | {| | + | {| class="wikitable" style="text-align:center" |
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
+ | ! Supply | ||
+ | ! Rev. F<sub>1</sub><sup>1</sup> | ||
+ | ! Rev. F<sub>0</sub>0 | ||
+ | ! Rev. D | ||
|- | |- | ||
− | | | + | | V<sub>core</sub> |
− | + | | 0.09 A | |
− | + | | 0.09 A | |
− | + | | 0.05 A | |
|- | |- | ||
− | | | + | | V<sub>lvd</sub> |
− | + | | 0.12 A | |
− | + | | 0.12 A | |
− | + | | 0.07 A | |
|- | |- | ||
− | | | + | | V<sub>a+</sub> |
− | + | | 0.12 A | |
− | + | | 0.36 A | |
− | + | | 0.12 A | |
|- | |- | ||
− | | | + | | V<sub>a−</sub> |
− | + | | 0.08 A | |
− | + | | 0.28 A | |
− | + | | 0.12 A | |
|- | |- | ||
− | | | + | | V<sub>ah</sub> |
− | + | | unused | |
− | + | | unused | |
− | + | | 0.02 A | |
|- | |- | ||
|} | |} | ||
Line 126: | Line 124: | ||
==Address Card== | ==Address Card== | ||
− | + | {| class="wikitable" style="text-align:center" | |
− | {| | + | |- |
+ | ! Supply | ||
+ | ! Rev. D | ||
|- | |- | ||
− | | | + | | V<sub>core</sub> |
|| 0.40 A | || 0.40 A | ||
|- | |- | ||
− | | | + | | V<sub>lvd</sub> |
|| 1.60 A | || 1.60 A | ||
|- | |- | ||
− | | | + | | V<sub>a+</sub> |
|| unused | || unused | ||
|- | |- | ||
− | | | + | | V<sub>a−</sub> |
|| unused | || unused | ||
|- | |- | ||
− | | | + | | V<sub>ah</sub> |
|| unused | || unused | ||
|- | |- | ||
|} | |} |
Revision as of 18:05, 15 December 2011
The power consumption during normal operation is listed here. The actual cosumption may vary depending on MCE firmware parameter settings, etc. This is calculated based on Vcore = 3V, Vlvd=4.5V, Va+=6.2V, Va− = −6.2V, Vah=10V.
Card | Revision | Power (W) |
---|---|---|
Clock Card | B | 8.73 |
Readout Card | E | 13.4 |
Readout Card | B | 25.5 |
Bias Card | F1 | 2.1 |
Bias Card | F0 | 4.8 |
Bias Card | D | 2.1 |
Address Card | D | 8.4 |
A simple form, based on the tables given below, to compute the power requirements of a subrack populated with user-selectable cards is available: http://e-mode.phas.ubc.ca/mce/cgi-bin/power.cgi
Clock Card
Supply | Rev. B |
---|---|
Vcore | 0.3 A |
Vlvd | 0.5 A |
Va+ | 0.9 A |
Va− | unused |
Vah | unused |
Readout Card
Supply | Rev. E | Rev. B |
---|---|---|
Vcore | 1.11 A | 0.85 A |
Vlvd | 0.20 A | 0.20 A |
Va+ | 1.11 A | 3.0–3.3 A |
Va− | 0.37 A | 0.25 A |
Vah | unused | 0.005 A |
Bias Card
Supply | Rev. F11 | Rev. F00 | Rev. D |
---|---|---|---|
Vcore | 0.09 A | 0.09 A | 0.05 A |
Vlvd | 0.12 A | 0.12 A | 0.07 A |
Va+ | 0.12 A | 0.36 A | 0.12 A |
Va− | 0.08 A | 0.28 A | 0.12 A |
Vah | unused | unused | 0.02 A |
1 In Rev. F1, in order to save power, L12 and L13 (ECO-055) are removed to disable regulators U34 and U35 supplying +/-5V to the low noise bias channels. This results in total of ~2.7W power saving.
Address Card
Supply | Rev. D |
---|---|
Vcore | 0.40 A |
Vlvd | 1.60 A |
Va+ | unused |
Va− | unused |
Vah | unused |