ModelSim SE Installation

Download ModelSim SE X.Yz

• Download the latest version of ModelSim SE here: http://www.model.com/downloads/default.asp.
• Put the downloaded files here: http://www.phas.ubc.ca/~scuba2/sc2mce/library/sw_lib/.

Note: Altera takes some time to issue libraries that are compatible with the latest version of ModelSim. By the time that the libraries are issues, the version of ModelSim that they support is usually no longer available from the ModelSim website. Therefore, it is in your best interest to hold onto the second-to-last version of ModelSim, which is the latest that Altera supports. To be sure that the Altera has created the libraries that you need to support the version of ModelSim that you are installing, check here: http://www.altera.com/support/software/nativelink/simulation/modelsim/eda_pro_msimfull_setup.html

Set up ModelSim SE X.Yz

• Load ModelSim SE
• Create a project called 'mce'
• Add the following files to the project's 'Top Level':
  • C:\Modeltech_X.Yz\vhdl_src\textio.vhd
  • C:\Modeltech_X.Yz\vhdl_src\standard.vhd
  • C:\altera\quartus60\eda\sim_lib\altera_mf_components.vhd
  • C:\altera\quartus60\eda\sim_lib\altera_mf.vhd
  • C:\altera\quartus60\eda\sim_lib\220pack.vhd
  • C:\altera\quartus60\eda\sim_lib\220model.vhd

Additional Instructions on how to set up a ModelSim for Altera FPGAs are here:

• http://www.altera.com/support/software/nativelink/simulation/modelsim/eda_view_using_msim.html