Difference between revisions of "Bus Backplane"
From MCEWiki
| Line 2: | Line 2: | ||
The bus backplane distributes power to MCE cards and also provides the data bus which allows inter-card communication. The data bus consist of a multi-drop 'command' line from the master slot (clock card) to all slave cards (readout, address, bias cards) and two point-to-point 'reply' lines from each slave card to the clock card. All JTAG signals are routed on the backplane to form a single JTAG chain that can be used to program all the cards in the MCE. Bypass buffers on the JTAG signals allow programming a partially populated MCE. | The bus backplane distributes power to MCE cards and also provides the data bus which allows inter-card communication. The data bus consist of a multi-drop 'command' line from the master slot (clock card) to all slave cards (readout, address, bias cards) and two point-to-point 'reply' lines from each slave card to the clock card. All JTAG signals are routed on the backplane to form a single JTAG chain that can be used to program all the cards in the MCE. Bypass buffers on the JTAG signals allow programming a partially populated MCE. | ||
| + | * [[MCE backplane protocol]] | ||
== Schematics == | == Schematics == | ||
Revision as of 16:44, 5 April 2016
Template:Hierarchy header The bus backplane distributes power to MCE cards and also provides the data bus which allows inter-card communication. The data bus consist of a multi-drop 'command' line from the master slot (clock card) to all slave cards (readout, address, bias cards) and two point-to-point 'reply' lines from each slave card to the clock card. All JTAG signals are routed on the backplane to form a single JTAG chain that can be used to program all the cards in the MCE. Bypass buffers on the JTAG signals allow programming a partially populated MCE.
