Difference between revisions of "MCE firmware"
From MCEWiki
| Line 3: | Line 3: | ||
Note that after a reset, not all of the DAC outputs are reset to zero. In addition, values written to RAM-based registers are not reset. To reset these registers, a full reconfiguration is required. | Note that after a reset, not all of the DAC outputs are reset to zero. In addition, values written to RAM-based registers are not reset. To reset these registers, a full reconfiguration is required. | ||
| − | > rs cc config_fac 1 '''OR''' rs cc config_app 1 | + | > rs cc config_fac 1 '''OR''' > rs cc config_app 1 |
> mce_reset_clean | > mce_reset_clean | ||
Revision as of 09:38, 9 July 2008
Always cleanly reset the MCE after a power-up or a reconfiguration! If you do not, MCE communication with the PC may not work.
> mce_reset_clean
Note that after a reset, not all of the DAC outputs are reset to zero. In addition, values written to RAM-based registers are not reset. To reset these registers, a full reconfiguration is required.
> rs cc config_fac 1 OR > rs cc config_app 1 > mce_reset_clean
Contents
MCE Firmware Release Information
MCE Features and How-To Guides
- Digital 4-pole Butterworth Low-pass filter
- Flux jumping
- Raw-mode readout
- High rate acquisition
- Fast SQ2 Feedback and TES Biasing with an Address Card
- The STOP Command
Hardware Peripherals
Software Tools
All that you need to know about logging into our CVS repository can be found here:
We decided (sadly) NOT to migrate from CVS to SVN, if we ever do here is some information:
- SVN Manual
- Accessing the SVN Repository
- SVN Commit Guidelines
- SVN Basic Operations
