Difference between revisions of "Bias Card firmware"
From MCEWiki
| Line 10: | Line 10: | ||
* '''Feautres''' : | * '''Feautres''' : | ||
** added flux_fb_upper command to be able to test the mcev2 subrack and set bias only for the upper 16 channels | ** added flux_fb_upper command to be able to test the mcev2 subrack and set bias only for the upper 16 channels | ||
| − | |||
| − | * | + | == 1.3.7 == |
| − | + | * '''Filename''' : bc_v01030007_07mar2007.sof or .pof | |
| + | * '''Feautres''' : | ||
| + | ** fpga_temp bug is fixed. | ||
| + | * ''' Bugs ''': | ||
| + | ** Sometimes the card is not responsive after a reset. This was diagnosed as being related to non-safe FSMs. | ||
| + | |||
| + | == to-do list == | ||
| + | |||
| + | * the DAC clocks are driven through a counter, but they should be driven off a PLL 12.5MHz | ||
Revision as of 13:29, 16 May 2008
Contents
1.4.1
- Filename : bc_v01040001_25jan2008.sof or .pof
- Feautres :
- added card_type and scratch commands
- integrated fw_rev and slot_id as part of all_cards
- added provisions for safe state machines to fix the reset problem.
- added lvds_tx = 0 so clock-card can check whether the card is plugged in using this spare lvds line.
1.4.0
- Filename : bc_v01040000_14dec2007.sof or .pof
- Feautres :
- added flux_fb_upper command to be able to test the mcev2 subrack and set bias only for the upper 16 channels
1.3.7
- Filename : bc_v01030007_07mar2007.sof or .pof
- Feautres :
- fpga_temp bug is fixed.
- Bugs :
- Sometimes the card is not responsive after a reset. This was diagnosed as being related to non-safe FSMs.
to-do list
- the DAC clocks are driven through a counter, but they should be driven off a PLL 12.5MHz
