Difference between revisions of "Bias Card firmware"
From MCEWiki
| Line 1: | Line 1: | ||
== 1.4.2 == | == 1.4.2 == | ||
* '''Filename''' : bc_v04000002_15feb2008.sof or .pof | * '''Filename''' : bc_v04000002_15feb2008.sof or .pof | ||
| − | * '''Feautres''' : added lvds_tx = 0 so clock-card can check whether the card is plugged in using this spare lvds line. | + | * '''Feautres''' : |
| + | ** added lvds_tx = 0 so clock-card can check whether the card is plugged in using this spare lvds line. | ||
== 1.4.1 == | == 1.4.1 == | ||
* '''Filename''' : bc_v01000401_15feb2008.sof or .pof | * '''Filename''' : bc_v01000401_15feb2008.sof or .pof | ||
| − | * '''Feautres''' : added card_type and scratch commands | + | * '''Feautres''' : |
| − | + | ** added card_type and scratch commands | |
| − | + | ** integrated fw_rev and slot_id as part of all_cards | |
| + | ** added provisions for safe state machines to fix the reset problem. | ||
== 1.4.0 == | == 1.4.0 == | ||
* '''Filename''' : bc_v01000400_15feb2008.sof or .pof | * '''Filename''' : bc_v01000400_15feb2008.sof or .pof | ||
| − | * '''Feautres''' : added flux_fb_upper command to be able to test the mcev2 subrack and set bias only for the upper 16 channels | + | * '''Feautres''' : |
| + | ** added flux_fb_upper command to be able to test the mcev2 subrack and set bias only for the upper 16 channels | ||
---- | ---- | ||
Revision as of 16:31, 15 February 2008
1.4.2
- Filename : bc_v04000002_15feb2008.sof or .pof
- Feautres :
- added lvds_tx = 0 so clock-card can check whether the card is plugged in using this spare lvds line.
1.4.1
- Filename : bc_v01000401_15feb2008.sof or .pof
- Feautres :
- added card_type and scratch commands
- integrated fw_rev and slot_id as part of all_cards
- added provisions for safe state machines to fix the reset problem.
1.4.0
- Filename : bc_v01000400_15feb2008.sof or .pof
- Feautres :
- added flux_fb_upper command to be able to test the mcev2 subrack and set bias only for the upper 16 channels
