Difference between revisions of "Sync Box firmware"
From MCEWiki
(→Firmware Download Instructions!) |
|||
Line 1: | Line 1: | ||
= Firmware Download Instructions! = | = Firmware Download Instructions! = | ||
− | There | + | There is an Altera CPLD (EPM570T144C3) and an Atmel micro-controller (AT89C51) on the Sync board and ''most times'' both need to be reprogrammed to upgrade the Sync Box firmware. |
The CPLD firmware can be loaded using the Altera USB-Blaster that connects to the on-board P23 JTAG header, and Quartus Programmer software. A *.pof file needs to be loaded. | The CPLD firmware can be loaded using the Altera USB-Blaster that connects to the on-board P23 JTAG header, and Quartus Programmer software. A *.pof file needs to be loaded. | ||
− | The micro-controller firmware can be loaded using a USB cable that connects to the on-board J1 connector, and Flip Programmer software available from Atmel website. A *.hex file needs to be loaded. | + | The micro-controller firmware can be loaded using a USB cable that connects to the on-board J1 connector, and [http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3886 Flip] Programmer software available from Atmel website. A *.hex file needs to be loaded. |
For more details, see section 9 in: [http://www.phas.ubc.ca/~mce/mcedocs/hardware/tech_description/SyncBox_UserGuide_S589_502.pdf Sync Box User's Guide] | For more details, see section 9 in: [http://www.phas.ubc.ca/~mce/mcedocs/hardware/tech_description/SyncBox_UserGuide_S589_502.pdf Sync Box User's Guide] | ||
+ | |||
+ | ''Note: I had to install Flip on 3 computers before I could get the USB driver to work!'' | ||
[http://www.phas.ubc.ca/~mce/mcedocs/firmware/ Firmware .hex & .pof Downloads] | [http://www.phas.ubc.ca/~mce/mcedocs/firmware/ Firmware .hex & .pof Downloads] |
Revision as of 14:52, 25 February 2010
Contents
Firmware Download Instructions!
There is an Altera CPLD (EPM570T144C3) and an Atmel micro-controller (AT89C51) on the Sync board and most times both need to be reprogrammed to upgrade the Sync Box firmware.
The CPLD firmware can be loaded using the Altera USB-Blaster that connects to the on-board P23 JTAG header, and Quartus Programmer software. A *.pof file needs to be loaded.
The micro-controller firmware can be loaded using a USB cable that connects to the on-board J1 connector, and Flip Programmer software available from Atmel website. A *.hex file needs to be loaded.
For more details, see section 9 in: Sync Box User's Guide
Note: I had to install Flip on 3 computers before I could get the USB driver to work!
Firmware .hex & .pof Downloads
Firmware set Rev. 1f
- Filename
- sync_box_v1f_25feb2010.pof
- sync_box_v1f_25feb2010.hex
- Features
- adds a ckd command to the rs232 interface to adjust the frequency of DV_Spare1 and DV_Spare2 by setting a 50MHz divisor through the command.
- when you turn on the sync box, the firmware revision 1f appears on the rs232 terminal
Firmware set Rev. 1e (6e?)
- Filename
- sync_box_v6e_11aug2008.pof
- sync_box_v1c_17nov2006.hex
- Features
- added a 50MHz clock on SMA output of the Sync box
- Note
- Since the microcontroller code is still 1c and that is what is reported in rs232 terminal, there is no way to identify this set from a 1c set.
Firmware set Rev. 1c
- Filename
- sync_box_v6c_19oct2006.pof
- sync_box_v1c_17nov2006.hex
- Features
original firmware