Sync Box DC-in io
From MCEWiki
- MCE0 to MCE7
- 8 Fibre outputs. Carries a 50 MHz Manchester-encoded signal containing data packets, which include incremented sequence numbers. Programmable as two sets of 4 outputs with differently spaced data packets on each.
- RS232 Command IO
- DB9 connector, TTL input and output, used to command the Sync Box from a PC using a regular RS232 cable.
- TTL-IN
- BNC connector, TTL input, spare input to the FPGA. ***Not currently used, and open for suggestions.
- TTL-OUT
- BNC connector, TTL output. Carries a 50 MHz clock signal.
Interface Connector
- A DB25 connector that provides the following auxiliary input/outputs:
- DATA_VALID
- Differential RS485 input. Detects falling edges from a Real-Time Sequencer (implemented by SCUBA2) which tells the Sync box when to tell the MCE's to collect data.
- DATA_SYNC1 (formerly DV_SPARE1)
- differential RS485 output. Carries a 5 MHz clock signal that is synchronous with DATA_SYNC2. (WARNING: signal polarity may be swapped)
- DATA_SYNC2 (formerly DV_SPARE2)
- differential RS485 output. Carries a 5 MHz data signal that is synchronized with DATA_SYNC1, and contains the same frame sequence numbers as the MCE(0-7) outputs. NOTE: This output only contains the DV info stream (40-bit), but not the occurrences of Addr_Return-to-Zero between DVs. (WARNING: signal polarity may be swapped)
- DATA_SYNC3
- output, available both as TTL and differential RS485, asserted for 1us on an Address-Return-to-Zero(ARZ) if a DV pulse is detected since the last ARZ.
- DATA_SYNC4
- output, available both as TTL and differential RS485, asserted for 1us on an Address-Return-to-Zero(ARZ) if a DV pulse is detected since the last ARZ.
Pinout
Pin | Signal | Pin | Signal |
---|---|---|---|
1 | Data_Valid+ | 14 | GND |
2 | Data_Valid- | 15 | Data_Sync1+ |
3 | GND | 16 | Data_Sync1- |
4 | Data_Sync2+ | 17 | GND |
5 | Data_Sync2- | 18 | Data_Sync3+ |
6 | GND | 19 | Data_Sync3- |
7 | Data_Sync3_TTL | 20 | GND |
8 | GND | 21 | Data_Sync4+ |
9 | Data_Sync4_TTL | 22 | Data_Sync4- |
10 | N/C | 23 | GND |
11 | N/C | 24 | N/C |
12 | N/C | 25 | N/C |
13 | N/C |