MCE hardware
From MCEWiki
Revision as of 23:13, 9 July 2008 by 24.84.37.64 (talk)
MCEv2 5-MDM design notes
- Jumpers
- Jumpers for signal pairs have reference designators of JPn and JNn (eg. JP1 and JN1 are signal pair jumpers)
- These jumpers are called out on the BOM as zero ohm resistors or DNP (do not populate) parts
- Zero ohm resistors will not be used for connect ground planes, copper traces will be used
- Low-noise bias lines
