Clock Card firmware

Latest Stable Release

v 4.0.9 (cc_v04000009)

Features:

Header Version 6
Integrated a bug fix for the sram_ctrl block
Integrated new all_cards block of code which was causing a synthesis warning in ModelSim
Two new commands added: card_type, scratch.

Bugs:

In fast DAS, if I try to issue ‘w cc led 1 2 3 … 58’, the MCE/ DAS will fail at the second command.
Cards with no firmware loaded are treated as ‘not present’ and therefore replies come back as OK as oppose to ER. (comment added by MA)
When PSUC is not present (or fails), rb psc psc_status comes back as OK with all entries as 0. (comment added by MA)
fpga_temp readings are way off.
Switching to Application Config sometimes fails and the red light comes up.
If the FPGA on a card is not programmed, it does not report an error (it treats the card as the not-present card and therefore the error is masked).
If PSUC is not present and not communicating, CC doesn't report error and instead reports RBOK