Clock Card firmware

Latest Stable Revision

v 4.0.9 (cc_v04000009)

Bug 1: In fast DAS, if I try to issue ‘w cc led 1 2 3 … 58’, the MCE/ DAS will fail at the second command.
Bug 2: Cards with no firmware loaded are treated as ‘not present’ and therefore replies come back as OK as oppose to ER. (comment added by MA)
Bug 3: When PSUC is not present (or fails), rb psc psc_status comes back as OK with all entries as 0. (comment added by MA)
Bug 4: fpga_temp readings are way off.
Bug 5: Switching to Application Config sometimes fails and the red light comes up.
Bug 6: If the FPGA on a card is not programmed, it does not report an error (it treats the card as the not-present card and therefore the error is masked).
Bug 7: If PSUC is not present and not communicating, CC doesn't report error and instead reports RBOK