MAS start/stop
The only persistent application in MAS is the logging daemon, maslog. To unload MAS, you should stop maslog and then unload the MAS driver.
maslog
The only persistent application in MAS is the logging daemon, maslog_server. To see if it is running, run
$ ps -e |grep maslog_server
To bring it down cleanly, use the maslog application with the exit command:
$ maslog stop
To start the server up again, do
$ maslog start
driver
The MAS driver, when loaded, will register itself as "mce_dsp". You can check for its presence in the list of modules:
$ cat /proc/modules |grep mce mce_dsp 36564 0 - Live 0xf8c1e000
To unload it, run
$ sudo rmmod mce_dsp
To load it again, run
$ sudo modprobe mce_dsp
device files
Once the driver is installed it is necessary to create access points in /dev. This is done with the script mknodes in the driver source directory (this will be made better...)
$ /home/mce/mas/driver/mknodes
These nodes can be removed, if desired, with a normal rm command:
$ sudo rm /dev/mce_*