Difference between revisions of "PCI card firmware"
From MCEWiki
| Line 1: | Line 1: | ||
| + | = Download = | ||
| + | |||
| + | * U0105 (latest) - http://e-mode.phas.ubc.ca/~mhasse/mce/SDSU_RevU0105.s | ||
| + | * U0104 (stable) - http://e-mode.phas.ubc.ca/~mhasse/mce/SDSU_RevU0104.s | ||
| + | |||
| + | = Misc. = | ||
| + | |||
* [[ PCI card bug list ]] | * [[ PCI card bug list ]] | ||
| − | * [[ PCI card | + | * [[ PCI card hacking ]] |
* [[ PCI card code assembly on Linux ]] | * [[ PCI card code assembly on Linux ]] | ||
| − | * | + | |
| + | = Firmware version notes = | ||
| + | |||
| + | == Latest release: U0105 (2009-06-08) == | ||
| + | |||
| + | * Backward compatible with U0104. | ||
| + | * Support for MCE STOP commands and commands-on-the-fly. | ||
| + | * Accelerated MCE command code (along with Quiet-RP this increases commanding rate to ~6 kHz). | ||
| + | * Quiet-RP simplifies the protocol for MCE reply handling. | ||
| + | * Low-level improvements: | ||
| + | ** CON is done as PCI burst | ||
| + | ** Fibre-optic FIFO is emptied with timed read instead of polling. | ||
| + | ** Hand-shaking for interrupts instead of host command to clear INTA and HC3. | ||
| + | ** Non-interrupt context code disables interrupts when performing PCI transactions. | ||
| + | ** Host vector interrupts are otherwise enabled, so PC doesn't have to force with HNMI bit. | ||
| + | |||
| + | == Last stable version: U0104 == | ||
| + | |||
| + | * Implements quiet transfer mode! Remains backwards compatible with A1.4. | ||
| + | * Fixes the 64k boundary crossing issue | ||
| + | * Moves parameters that enter via interrupt out of registers and into variables | ||
| + | * Version reporting tag-along to RDM command (sending 'VER' to RDM's vector address returns the code version). | ||
| + | * Maximum burst length is reduced to 64 bytes, and is configurable. | ||
| + | * Reset (RST) clears the fibre fifo | ||
| + | |||
| + | == Oldest UBC release: U0103 == | ||
| + | |||
| + | * Minor modifications of SCUBA2's A1.4 firmware, to improve PCI stability. | ||
| + | * Not compatible with non-realtime systems. | ||
Revision as of 00:28, 2 October 2009
Contents
Download
- U0105 (latest) - http://e-mode.phas.ubc.ca/~mhasse/mce/SDSU_RevU0105.s
- U0104 (stable) - http://e-mode.phas.ubc.ca/~mhasse/mce/SDSU_RevU0104.s
Misc.
Firmware version notes
Latest release: U0105 (2009-06-08)
- Backward compatible with U0104.
- Support for MCE STOP commands and commands-on-the-fly.
- Accelerated MCE command code (along with Quiet-RP this increases commanding rate to ~6 kHz).
- Quiet-RP simplifies the protocol for MCE reply handling.
- Low-level improvements:
- CON is done as PCI burst
- Fibre-optic FIFO is emptied with timed read instead of polling.
- Hand-shaking for interrupts instead of host command to clear INTA and HC3.
- Non-interrupt context code disables interrupts when performing PCI transactions.
- Host vector interrupts are otherwise enabled, so PC doesn't have to force with HNMI bit.
Last stable version: U0104
- Implements quiet transfer mode! Remains backwards compatible with A1.4.
- Fixes the 64k boundary crossing issue
- Moves parameters that enter via interrupt out of registers and into variables
- Version reporting tag-along to RDM command (sending 'VER' to RDM's vector address returns the code version).
- Maximum burst length is reduced to 64 bytes, and is configurable.
- Reset (RST) clears the fibre fifo
Oldest UBC release: U0103
- Minor modifications of SCUBA2's A1.4 firmware, to improve PCI stability.
- Not compatible with non-realtime systems.
