Difference between revisions of "Vicor Power Assembly"
From MCEWiki
(→Notes) |
|||
| Line 1: | Line 1: | ||
{{Hierarchy header}} | {{Hierarchy header}} | ||
| − | The MCE can alternatively be equipped with a 18–36Vin (24Vin nominal) switching supply designed for use in balloon-based experiments. | + | The MCE can alternatively be equipped with a 18–36Vin (24Vin nominal) switching supply designed for use in balloon-based experiments. This unit contains a set of [http://www.vicorpower.com/dc-dc-converters-board-mount Vicor DC-DC converters] that are trimmed to accomodate losses of up to 2m cable, so they can be located up to 2m away from the actual MCE crate. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Specification== | == Specification== | ||
| Line 40: | Line 23: | ||
: < 2kg and a 1m power cable is ~1kg | : < 2kg and a 1m power cable is ~1kg | ||
| + | === Schematics === | ||
| + | * Schematics for the Vicor Supplies can be found [http://www.phas.ubc.ca/~mce/mcedocs/hardware/schematics/PowerSupplyVicor/ELE_C585-401_RevC2_VicorPSU_Schematics.pdf here] | ||
| + | * The schematics for the Wiring harness in the box and the pinout for the Winchester connector: [http://www.phas.ubc.ca/~mce/mcedocs/hardware/schematics/PowerSupplyVicor/ELE-C584-402_RevA_Wiring_Harness.pdf pdf] | ||
| + | |||
| + | Check the schematics for Input/Output connector pinout. | ||
| + | ; Output Connector | ||
| + | : Winchester MRA34SG | ||
| + | ;Input Connector | ||
| + | : Amphenol PTC-2A-14-5P | ||
| + | |||
| + | === Mechanical Drawings === | ||
| + | [http://www.phas.ubc.ca/~mce/mcedocs/mechanical/Spider_PSU_Mtg_AluBoxRevC.zip Mechanical Drawings for Vicor Aluminum Box RevC] | ||
== Notes == | == Notes == | ||
#The Vicor supply is equipped with two Winchester connectors to power two MCE48 crates. So far, we are able to use a Y cable and power two MCE48 from one connector. When we tried to use each connector separately, with separate cables, oddly enough, the noise performance was degraded. | #The Vicor supply is equipped with two Winchester connectors to power two MCE48 crates. So far, we are able to use a Y cable and power two MCE48 from one connector. When we tried to use each connector separately, with separate cables, oddly enough, the noise performance was degraded. | ||
# We have not used the Vicor supply to power a 5-MDM MCE72 '''yet'''. The power requirements for a 5-MDM MCE are disctributed slightly differently than twice an MCE48 mainly due to LN_BIAS circutries. | # We have not used the Vicor supply to power a 5-MDM MCE72 '''yet'''. The power requirements for a 5-MDM MCE are disctributed slightly differently than twice an MCE48 mainly due to LN_BIAS circutries. | ||
| + | == Photos == | ||
| + | <gallery> | ||
| + | File:Vicor supply 1.jpg | ||
| + | File:Vicor supply 2.jpg | ||
| + | File:Vicor supply 3.jpg | ||
| + | </gallery> | ||
| + | |||
== Testing == | == Testing == | ||
* [[Testing VPA]] | * [[Testing VPA]] | ||
Revision as of 09:36, 14 November 2013
Template:Hierarchy header The MCE can alternatively be equipped with a 18–36Vin (24Vin nominal) switching supply designed for use in balloon-based experiments. This unit contains a set of Vicor DC-DC converters that are trimmed to accomodate losses of up to 2m cable, so they can be located up to 2m away from the actual MCE crate.
Specification
- DC Input Type
- 18-36V
- 3A from 24V to power one 3-MDM MCE48 crate (6A for two)
- DC output
- pVa: 6.1 to 6.3 V
- nVa: -6.1 to -6.3 V
- Vlvd: 4.4 to 4.7 V
- Vcore: 2.9 to 3.2 V
- Watts
- 100W
- Regulated
- Yes
- Efficiency
- 75%
- Dimensions (L x W x H)
- 24cm x 20cm x 5cm
- Weight
- < 2kg and a 1m power cable is ~1kg
Schematics
- Schematics for the Vicor Supplies can be found here
- The schematics for the Wiring harness in the box and the pinout for the Winchester connector: pdf
Check the schematics for Input/Output connector pinout.
- Output Connector
- Winchester MRA34SG
- Input Connector
- Amphenol PTC-2A-14-5P
Mechanical Drawings
Mechanical Drawings for Vicor Aluminum Box RevC
Notes
- The Vicor supply is equipped with two Winchester connectors to power two MCE48 crates. So far, we are able to use a Y cable and power two MCE48 from one connector. When we tried to use each connector separately, with separate cables, oddly enough, the noise performance was degraded.
- We have not used the Vicor supply to power a 5-MDM MCE72 yet. The power requirements for a 5-MDM MCE are disctributed slightly differently than twice an MCE48 mainly due to LN_BIAS circutries.
Photos
