Difference between revisions of "Address Card RevC to RevD Changes"
From MCEWiki
| Line 2: | Line 2: | ||
: Parallel DACs are now powered from V<sub>lvd</sub> rail of 4.5V instead of +V<sub>a</sub> rail of 6.2V. This results in 2.5W power saving. | : Parallel DACs are now powered from V<sub>lvd</sub> rail of 4.5V instead of +V<sub>a</sub> rail of 6.2V. This results in 2.5W power saving. | ||
: There is a configurable ferrite bead (L3/L14) to fall back on +Va if interested. | : There is a configurable ferrite bead (L3/L14) to fall back on +Va if interested. | ||
| + | |||
| + | [[Category:Hardware]] | ||
Revision as of 14:51, 30 August 2016
- Lower Power in Rev. D
- Parallel DACs are now powered from Vlvd rail of 4.5V instead of +Va rail of 6.2V. This results in 2.5W power saving.
- There is a configurable ferrite bead (L3/L14) to fall back on +Va if interested.
